Weighbridges

Many sized bridges from 30000kg to 100000kg 

Whether you need a top of the line MettlerToledo DigiTOL or Averyweightronix Bridgemont weighbridge or you are looking for a lower cost alternative such as the imported SCS-M weighbridge we can help.

There are many things to consider when purchasing a weighbridge for your site and you only get the one chance to purchase, so make the right choice and get the best advice you can.

The weighbridge needs to be based on your application/needs, quality and performance.

There are 3 different types of weighbridges to consider:

• In ground or Pit - This was the standard design for many years and is still the best performing as less of the structure is exposed to the elements.
• Above Ground - These are cheaper than the in ground design and require less civil work in the initial installation but being above ground they are more exposed to the elements particularly wind. They also have a ramp up to the deck so split weighing can not be done acurately
• Portable or Re-locatable. The Portable/Re-locatable type is also popular due to their portability, this type of weighbridge is more expensive to manufacture due to the additional support required to complete the installation. Some less acurate types have been approved for the weighing of silage only.

Steel Road Weighbridge

(In-Ground or above Ground)

• Approved for Trade use in New Zealand MCA1975
• 8mm + 2mm Checker Plate Deck
• 8 x 6mm x 250mm U-Beams
• Surface Treatment – Shot blasted followed by 2 coats of primer epoxy paint and one coat alkyd enamel finish paint
• Four OIML approved Zemic BM14G Stainless Steel Compression Loadcells
• Stainless steel junction box
• Concentrated Load Capacity of 20000kg
• Span deflection Ratio of 1 : 600
• Optional Steel Ramps and Side Rails available

To discuss your requrements further please contact us:

sales@scaletec.co.nz

0800765041